Discontinued App

Call List Pro 2

General: - Connect per WLAN, GPRS, EDGE or UMTS. - All contents can only be showed online. - The call list can only be requested per remote query, ...

Discontinued App

Description

General: - Connect per WLAN, GPRS, EDGE or UMTS. - All contents can only be showed online. - The call list can only be requested per remote query, not over the internal net http://fritz.box ! - Fritzboxes from 7170 and up will be supported - For a continuous deployment and proper function of the service site can not be guaranteed. - New: DTMF dial with fixed-line phone - New: Callthrough function Use: - Start the program - call up the settings - Enter the data of your Fritzbox - The button'Test' only checks if your Fritzbox can be pinged - Press 'Save' and exit the settings - Press the button 'Calls' - If all data is correct and the Fritzbox is set correct, then you should see the call list Configuration of the Fritzbox: - Establish a free DYNDNS-Account (e.g. at www.dyndns.org) - Enter the data in the Fritzbox: Startpage* > Dynamic DNS - Activate remote servicing: Startpage* > remote servicing - Assign a password of the Fritzbox for internet access (not realy necessary) - Enter all values to the settings of the iPhone program * Startpage: http://fritz.box (Desktop PC: run a Browser) Functions: - Per click on a phone number you can make the call - The program replaces 0 by e.g. +49 - Symbol AB: It is used a complex calculation, but it can happen that this symbol is showed and there is no message left. DTMF Tone dial (from Version 1.2): - Click longer on the time at the right in a row (not on the number) - The row will be marked - Presse "copy" - The number occurs now above in the text field - You can edit the number or enter a new one - Use another fixed-line phone and pick it up so that you can hear the free line signal - The fixed-line phone must support DTMF dialing - Hold the microphone near the speaker of the iPhone - Press the button "DTMF Dial" - The number is now dialed with tone dial. - After a short time you will be connected with the subscriber Callthrough (from Version 1.4) - Usefull if youhave a pricy fixed phone contract and want to phone cost-effective - Enter in the iPhone App the Fritzbox-phone number and PIN - Activate in the Fritzbox the Callthrough function - Clicklonger on the time at the right in a row (not on the number) - The row will be marked - Press "copy" - Now the complete number occurs above - Click on this number and use now the function. Settings for Callthrough in the Fritzbox: - Call http://fritz.box in the Browser - Settings > Extended settings > Telephony > Call forwarding > Callthrough Hint: It works with 'old' and 'new' (SessionID) Firmware, e.g.: 7170: 29.04.70 or higher 7270: 54/74.04.70 or higher 7390: 5.28 or 5.50 or higher 6390: 5.28 or higher and future versions

More

Technical specifications

Version: 4.1

Size: 887.03 KB

System:

Price: 2,72 €

Developed by Pocketkai

Day of release: 2013-06-14

Recommended age: 4+

Comments about Call List Pro 2

*We won´t use your data for marketing purposes, we only need to check your email
We use cookies to improve our services and tailoring our ads to match your requirements and navigation habits. Accept · Read more